Additive Manufacturing: Alloy Design and Process Innovations

Wang, Zhi; Konda Gokuldoss, Prashanth

doi:10.3390/books978-3-03928-353-8

dc.contributor.author	Wang, Zhi	*
dc.contributor.author	Konda Gokuldoss, Prashanth	*
dc.date.accessioned	2021-02-11T07:42:25Z
dc.date.available	2021-02-11T07:42:25Z
dc.date.issued	2020	*
dc.date.submitted	2020-06-09 16:38:57	*
dc.identifier	46012	*
dc.identifier.uri	https://directory.doabooks.org/handle/20.500.12854/40123
dc.description.abstract	Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers and scientists, because of its ability to produce materials with a complex shape without theoretical restrictions and with added functionalities. There are several advantages to employing additive manufacturing as the primary additive manufacturing process. However, there exist several challenges that need to be addressed systematically. A couple such issues are alloy design and process development. Traditionally alloys designed for conventional cast/powder metallurgical processes were fabricated using advanced AM processes. This is the wrong approach considering that the alloys should be coined based on the process characteristics and meta-stable nature of the process. Hence, we must focus on alloy design and development for AM that suits the AM processes. The AM processes, however, improve almost every day, either in terms of processing capabilities or processing conditions. Hence, the processing part warrants a section that is devoted to these advancements and innovations. Accordingly, the present Special Issue (book) focuses on two aspects of alloy development and process innovations. Here, 45 articles are presented covering different AM processes including selective laser melting, electron beam melting, laser cladding, direct metal laser sintering, ultrasonic consolidation, wire arc additive manufacturing, and hybrid manufacturing. I believe that this Special Issue bears is vital to the field of AM and will be a valuable addition.	*
dc.language	English	*
dc.subject	TA1-2040	*
dc.subject	T1-995	*
dc.subject.classification	thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology	en_US
dc.subject.other	microstructure	*
dc.subject.other	slag	*
dc.subject.other	crystallographic texture	*
dc.subject.other	epoxy solder	*
dc.subject.other	additive manufacturing	*
dc.subject.other	substrate preheating	*
dc.subject.other	thermosetting epoxy resin	*
dc.subject.other	AlSi10Mg alloy	*
dc.subject.other	impact	*
dc.subject.other	residual stress	*
dc.subject.other	stability lobe diagram	*
dc.subject.other	laves phase	*
dc.subject.other	vanadium	*
dc.subject.other	selective laser melting (SLM)	*
dc.subject.other	molten pool dynamic behavior	*
dc.subject.other	scanning strategy	*
dc.subject.other	pulse frequency	*
dc.subject.other	thin-walled weak rigidity parts	*
dc.subject.other	scanning	*
dc.subject.other	aluminum	*
dc.subject.other	elastic abrasive	*
dc.subject.other	2219 aluminum alloy	*
dc.subject.other	Powder bed	*
dc.subject.other	ABS	*
dc.subject.other	laser energy density	*
dc.subject.other	equivalent processing model	*
dc.subject.other	composition	*
dc.subject.other	numerical analysis	*
dc.subject.other	scanning electron microscopy (SEM)	*
dc.subject.other	Hastelloy X alloy	*
dc.subject.other	regular mixing	*
dc.subject.other	texture evolution	*
dc.subject.other	graphene nano-sheets (GNSs)	*
dc.subject.other	Electron Beam Melting	*
dc.subject.other	powder bed fusion	*
dc.subject.other	microstructural evolution	*
dc.subject.other	Mg content	*
dc.subject.other	cement	*
dc.subject.other	bulk metallic glasses	*
dc.subject.other	grain refinement	*
dc.subject.other	Taguchi	*
dc.subject.other	intermediate thermo-mechanical treatment	*
dc.subject.other	valorization	*
dc.subject.other	microstructure and properties	*
dc.subject.other	arc current	*
dc.subject.other	high computational efficiency	*
dc.subject.other	powder properties	*
dc.subject.other	dynamic characteristics	*
dc.subject.other	composite materials	*
dc.subject.other	CuAl2 phase	*
dc.subject.other	rapid solidification	*
dc.subject.other	magnetizer	*
dc.subject.other	M300 mold steel	*
dc.subject.other	circular economy	*
dc.subject.other	titanium alloy	*
dc.subject.other	Al–5Si alloy	*
dc.subject.other	Al–Mg–Si alloy	*
dc.subject.other	ultrasonic bonding	*
dc.subject.other	water absorption	*
dc.subject.other	disc brake	*
dc.subject.other	support strategy	*
dc.subject.other	inoculation	*
dc.subject.other	arc additive manufacture	*
dc.subject.other	3D metal printing	*
dc.subject.other	ultrafast laser	*
dc.subject.other	Hot Isostatic Pressure	*
dc.subject.other	arc additive manufacturing	*
dc.subject.other	continuous carbon fiber	*
dc.subject.other	performance characteristics	*
dc.subject.other	process-damping	*
dc.subject.other	intermetallic compound (IMC)	*
dc.subject.other	interfaces	*
dc.subject.other	direct metal laser sintering	*
dc.subject.other	porosity	*
dc.subject.other	nickel-based superalloy	*
dc.subject.other	element segregation	*
dc.subject.other	hydrophobicity	*
dc.subject.other	H13 tool steel	*
dc.subject.other	Cu50Zr43Al7	*
dc.subject.other	metal powders	*
dc.subject.other	parameter optimization	*
dc.subject.other	side spatters	*
dc.subject.other	powder packing	*
dc.subject.other	3D printing	*
dc.subject.other	precipitates	*
dc.subject.other	n/a	*
dc.subject.other	simulation	*
dc.subject.other	laser cladding deposition	*
dc.subject.other	melt pool size	*
dc.subject.other	quenching rate	*
dc.subject.other	Al–Mg alloy	*
dc.subject.other	tailored properties	*
dc.subject.other	workpiece scale	*
dc.subject.other	fatigue	*
dc.subject.other	laser cladding	*
dc.subject.other	Ti-6Al-4V	*
dc.subject.other	deformation	*
dc.subject.other	quality of the as-built parts	*
dc.subject.other	model	*
dc.subject.other	milling	*
dc.subject.other	wire feeding additive manufacturing	*
dc.subject.other	martensitic transformation	*
dc.subject.other	ball milling	*
dc.subject.other	Inconel 718	*
dc.subject.other	ablation	*
dc.subject.other	in-process temperature in MPBAM	*
dc.subject.other	subgranular dendrites	*
dc.subject.other	porosity reduction	*
dc.subject.other	femtosecond	*
dc.subject.other	paint bake-hardening	*
dc.subject.other	Al6061	*
dc.subject.other	defects	*
dc.subject.other	continuous dynamic recrystallization	*
dc.subject.other	wear	*
dc.subject.other	Additive manufacturing	*
dc.subject.other	volumetric heat source	*
dc.subject.other	Ti6Al4V alloy	*
dc.subject.other	AlSi10Mg	*
dc.subject.other	radial grooves	*
dc.subject.other	GH4169	*
dc.subject.other	temperature and stress fields	*
dc.subject.other	laser powder bed fusion	*
dc.subject.other	metallic glasses	*
dc.subject.other	numerical simulation	*
dc.subject.other	latent heat	*
dc.subject.other	divisional scanning	*
dc.subject.other	wire lateral feeding	*
dc.subject.other	laser powder bed fusion (LPBF)	*
dc.subject.other	heat treatment	*
dc.subject.other	thermal behaviour	*
dc.subject.other	fused filament fabrication	*
dc.subject.other	microstructures	*
dc.subject.other	thermal conductivity	*
dc.subject.other	12CrNi2 alloy steel powder	*
dc.subject.other	tensile strength	*
dc.subject.other	hot stamping steel blanks	*
dc.subject.other	multi-laser manufacturing	*
dc.subject.other	aluminum alloys	*
dc.subject.other	additive surface structuring	*
dc.subject.other	parts design	*
dc.subject.other	process parameters	*
dc.subject.other	thermal stress analysis	*
dc.subject.other	SLM process parameters	*
dc.subject.other	nickel alloys	*
dc.subject.other	Al–Si	*
dc.subject.other	powder flowability	*
dc.subject.other	laser power absorption	*
dc.subject.other	refractory high-entropy alloy	*
dc.subject.other	localized inductive heating	*
dc.subject.other	mechanical properties	*
dc.subject.other	selective laser melting	*
dc.subject.other	storage energy	*
dc.subject.other	concrete	*
dc.subject.other	mechanical property	*
dc.subject.other	gray cast iron	*
dc.subject.other	constitutive model	*
dc.subject.other	analytical modeling	*
dc.subject.other	hot deformation	*
dc.subject.other	epitaxial growth	*
dc.subject.other	design	*
dc.subject.other	flowability	*
dc.subject.other	amorphous alloy	*
dc.subject.other	PSO-BP neural network algorithm	*
dc.subject.other	molten pool evolution	*
dc.subject.other	microhardness measurement	*
dc.subject.other	macro defects	*
dc.subject.other	thermal capillary effects	*
dc.subject.other	finite element analysis	*
dc.subject.other	dynamic properties	*
dc.subject.other	WxNbMoTa	*
dc.subject.other	properties	*
dc.title	Additive Manufacturing: Alloy Design and Process Innovations	*
dc.type	book
oapen.identifier.doi	10.3390/books978-3-03928-353-8	*
oapen.relation.isPublishedBy	46cabcaa-dd94-4bfe-87b4-55023c1b36d0	*
oapen.relation.isbn	9783039283521	*
oapen.relation.isbn	9783039283538	*
oapen.pages	372	*
oapen.edition	1st	*

Files in this item

Files	Size	Format	View
There are no files associated with this item.

This item appears in the following Collection(s)

Imported or submitted locally

Show simple item record

Except where otherwise noted, this item's license is described as https://creativecommons.org/licenses/by-nc-nd/4.0/