Publications
Now showing items 1761-1840 of 2508
Die Dialektik der Globalisierung
(2009)
not yet available
60 Jahre Studium Generale und 20 Jahre Angewandte Kulturwissenschaft
(2009)
not yet available
Allgemeine Technologie
(2009)
Allgemeine Technologie, die Lehre von den grundlegenden Prinzipien der Technik, verbindet technik- und sozialwissenschaftliches Wissen mit philosophischen Überlegungen. Das Buch behandelt anhand zahlreicher Beispiele die ...
Active and Passive Plasmonic Devices for Optical Communications
(2018)
A short introduction to the theory of surface plasmon polaritons (SPPs) is given. The application of the SPPs in on-chip signal processing is discussed. In particular, two concepts of plasmonic modulators are reported, ...
Adaptive and Intelligent Temperature Control of Microwave Heating Systems with Multiple Sources
(2016)
In this work, an innovative real-time microwave control approach is proposed, to improve the temperature homogeneity under microwave heating. Multiple adaptive or intelligent control structures have been developed, including ...
Adaptive Antriebsstrangregelung für die Optimierung des Fahrverhaltens von Nutzfahrzeugen
(2009)
Starke Beschleunigungsvorgänge in schweren Nutzfahrzeugen führen aufgrund elastischer Bauelemente im Fahrzeug zu Schwingungen im Antriebsstrang. Diese übetragen sich auch auf den Fahrer, wodurch der Fahrkomfort stark ...
Activity Tree Harvesting - Entdeckung, Analyse und Verwertung der Nutzungskontexte SCORM-konformer Lernobjekte
(2010)
Der Erstellungsaufwand multimedialer Lernangebote kann durch die Wiederverwendung bestehender Materialien deutlich reduziert werden. Wie aber kann das Auffinden solcher wiederverwendbaren Lernressourcen unterstützt werden? ...
Akteursbasierte Simulation der energetischen Modernisierung des Wohngebäudebestands in Deutschland
(2014)
In this book, the stakeholder-based residential building and household simulation model AWOHM is developed and applied to the Federal Republic of Germany. It aims at the identification and the conceptual design of adequate ...
Akzeptanz und Auswirkung körperlich-sportlicher Aktivierung in der interdisziplinären pädiatrischen Adipositas-Nachsorge
(2007)
Ausgangspunkt der Untersuchung ist die Problematik der evidenzbasierten Erfassung der pädiatrischen Adipositasnachsorge und ihrer Wirksamkeit vor allem im Bezug auf die körperlich-sportliche Aktivität. Forschungsdefizite ...
Aktivierung, Konzentration, Entspannung : Interventionsmöglichkeiten zur Förderung fitnessrelevanter Kompetenzen im Studium
(2011)
Der Karlsruher Interventionskatalog stellt Lehrenden eine fundierte Auswahl kognitiver und körperlicher Übungen bereit. Zielsetzung dieser Interventionen ist die positive Beeinflussung von Konzentration, Befindlichkeit und ...
Aktuelle vertrags- und urheberrechtliche Aspekte der Erstellung, des Vertriebs und der Nutzung von Software
(2008)
In der Praxis hat sich ein florierender Handel mit sogenannter Gebrauchtsoftware entwickelt, der insb. die Reichweite des urheberrechtlichen Erschöpfungsgrundsatzes betrifft. In vertragsrechtlicher Hinsicht werden auf der ...
Aktive Frequenzvervielfacher zur Signalerzeugung im Millimeter- und Submillimeterwellen Frequenzbereich
(2015)
In this work a new transistor topology for frequency multiplication is developed, achieving relative bandwidths of complex and balanced structures with only four transistors. It enables the highest bandwidth in active ...
AlGaN/GaN-HEMT power amplifiers with optimized power-added efficiency for X-band applications
(2011)
This work has arisen out of the strong demand for a superior power-added efficiency (PAE) of AlGaN/GaN high electron mobility transistor (HEMT) high-power amplifiers (HPAs) that are part of any advanced wireless multifunctional ...
Allgemeine Geschäftsbedingungen in Peer-to-Peer-Märkten
(2010)
Die Arbeit behandelt elektronische Marktplätze, die ohne eine zentrale Instanz auskommen und allein durch die Marktteilnehmer entstehen. Sie bietet technische Ansätze und deren rechtliche Beurteilung, um den Zugangsnachweis ...
Advanced Signaling Support for IP-based Networks
(2013)
This work develops a set of advanced signaling concepts for IP-based networks. It proposes a design for secure and authentic signaling and provides QoS signaling support for mobile users. Furthermore, this work develops ...
(K)ein Ort Nirgends ; der Transitraum im urbanen Netzwerk
(2010)
Gegenstand dieses Buches ist die Auseinandersetzung mit dem Ort und dessen Positionierung in einem urbanen Raumgeflecht, das sich durch seinen transitorischen Charakter auszeichnet.
Alternanz - die EU-Konzeption für die Berufsausbildung. Erfahrungslernen Hand in Hand mit Abschnitten systematischer Ausbildung dargestellt unter Einbeziehung von Ergebnissen aus Ländervergleichen
(2004)
Der Rat der EU hatte im Jahre 1979 nach breitem Konsens Leitlinien zur alternierenden Ausbildung verabschiedet. Danach ist der regelmäßige Wechsel zwischen Erfahrungslernen in der Ernstsituation des Betriebs und Abschnitten ...
Alterungsverhalten mischleitender LSCF Kathoden für Hochtemperatur-Festoxid-Brennstoffzellen (SOFCs)
(2011)
In der Arbeit wurde das Alterungsverhalten von La0.58Sr0.4Co0.2Fe0.8O3-[delta] (LSCF) Kathoden für anodengestützte Hochtemperatur - Festoxid - Brennstoffzellen (SOFCs) in Abhängigkeit der Betriebstemperatur untersucht. Es ...
Advanced Treatment of Fission Yield Effects and Method Development for Improved Reactor Depletion Calculations
(2019)
Fission product yield data play an important role in simulations of nuclear fission reactors, aimed at fuel cycle and safety analyses. The respective evaluated data libraries still have shortcomings regarding the treatment ...
(Schw)Ehre, wem (Schw)Ehre gebührt : Festschrift zur Verabschiedung von Prof. Dr.-Ing. Dr. h.c. Bernhard Heck
(2018)
The commemorative publication in honor of Prof. Bernhard Heck contains 41 contributions written by friends, colleagues, co-workers and former PhD-students. The focus of the scientific articles is on Physical and Satellite ...
1933 - Die Gleichschaltung des politischen Katholizismus in Baden
(2013)
This study deals with with the enforced conformity (""Gleichschaltung"") of the Baden Center Party (Badische Zentrumspartei) during the process of National Socialist takeover in 1933. Based on documents in the estate of ...
24 Stunden sind eine Bibliothek : Lernen, Forschen, Kooperieren ; die innovative Bibliothek
(2012)
Die KIT-Bibliothek des Karlsruher Instituts für Technologie (KIT) ist eine der modernsten Bibliotheken Deutschlands. Seit über 30 Jahren gehört sie zu den Vorreitern im Bereich der innovativen Informationsdienste und sichert ...
24 Stunden sind eine Bibliothek : Lernen, Forschen, Kooperieren ; die innovative Bibliothek. 2. Aufl
(2013)
The KIT-Library of Karlsruhe Institute of Technology (KIT) is one of the most modern libraries in Germany. For more than 30 years, it has been and still is one of the pioneers in the area of innovative information services ...
2D-3D-Registrierung mit Parameterentkopplung für die Patientenlagerung in der Strahlentherapie
(2009)
Die optimale Lagerung des Patienten ist von entscheidender Bedeutung für den Erfolg einer Bestrahlung. In dieser Arbeit wird ein 2D-3D-Registrierungsverfahren für Hochenergiekontrollaufnahmen entwickelt, das die relevante ...
3D-GIS Visualisierung in der Umweltinformatik
(2005)
3D-Visualisierungen werden heutzutage in vielen verschiedenen Gebieten eingesetzt. Ein großer Vorteil der 3D-Visualisierung ist, dass sie komplexe räumliche Zusammenhänge leicht verständlich darstellen kann. Die Motivation ...
Ökologische und ökonomische Bewertung von Co-Vergärungsanlagen und deren Standortwahl
(2009)
Sowohl in landwirtschaftlichen als auch in abfallwirtschaftlichen Co-Vergärungsanlagen wird Biogas zur Strom- und Wärmeerzeugung energetisch genutzt. In dieser Arbeit werden, aufbauend auf einer Stoff- und Energiestrommo ...
Adsorption und Mobilisierung wasserlöslicher Kfz-emittierter Platingruppenelemente (Pt, Pd, Rh) an verschiedenen bodentypischen Mineralen
(2006)
Zur Bewertung der Umweltrelevanz der Kfz-emittierten PGE (Pt, Pd, Rh) ist das Verständnis ihres Verhaltens im Boden von grundlegender Bedeutung.In dieser Arbeit wurde das Sorptionsverhalten wasserlöslicher PGE an fünf ...
Adaptivität und semantische Interoperabilität von Manufacturing Execution Systemen (MES)
(2013)
MES (Manufacturing Execution Systems) are situated between automation and management level and are affected from changes of the production. Therefore their adaptivity within the lifecycle of production plants is mission ...
Adaptive Steuerung eines mehrsegmentigen Inspektionsroboters
(2010)
Mehrsegmentige Roboter können verschiedene Umgebungen befahren und inspizieren. In dieser Arbeit wird eine Steuerung entwickelt, die die selbständige Durchführung komplexer Bewegungen in unstrukturierten Umgebungen ermöglicht. ...
Adaptive State
(2016)
Mobile robot motion planning in unstructured dynamic environments is a challenging task. Thus, often suboptimal methods are employed which perform global path planning and local obstacle avoidance separately. This work ...
Adaptive Verhaltensentscheidung und Bahnplanung für kognitive Automobile
(2009)
In der vorliegenden Arbeit wird eine biologisch motivierte Verhaltenssteuerung für ein kognitives Automobil vorgestellt, die ein hohes Maß an Rückmeldung liefert und damit die Grundlage für zukünftige Lernverfahren bildet. ...
Mobilität in der globalisierten Welt
(2005)
not yet available
Multi-Physics Modelling towards the Stabilization of PAN Fibers with Microwaves Based on Experimental Data
(2024)
High energy demand is one reason for high costs of carbon fibers. One option to decrease them is to use microwave heating instead of conventional heating. In this work, steps towards a microwave assisted process during the ...
Zum Dämpfungsverhalten viskoelastischer Klebverbindungen im Stahlbau
(2024)
In this work, the damping properties of adhesively bonded joints are investigated numerically, experimentally and analytically. In numerical investigations on steel structures, the potential of bonded joints to optimise ...
Textkompetenz in den MINT-Fächern
(2024)
This edited volume is dedicated to the topic of text literacy in STEM subjects. Text literacy is understood as the ability to receive, produce and learn from texts. The topic of text literacy is dealt with in three sections, ...
Hybride und energieeffiziente Antriebe für mobile Arbeitsmaschinen
(2021)
This book contains the collected conference proceedings to the lectures of the 8th symposium on 23rd February 2021 in Karlsruhe. The state of research and new developments in the field of drive technology for mobile machines ...
13. Kolloquium Mobilhydraulik : Karlsruhe, 8./9. Oktober 2024
(2024)
The manuscript “13th Mobile hydraulic colloquium” contains the collected contributions to the presentations of the event of the same name, which took place on the 8th/9th October 2024 in Karlsruhe. In nine articles the ...
Der Einfluss nachhaltigkeitsbezogener Objektmerkmale auf den Wert von Immobilien – ein Beitrag zur Weiterentwicklung von Datenhaltung und Wertermittlungsverfahren
(2021)
This work starts with the real estate industry as an important field of action for sustainable development and examines the consideration of sustainability-relevant property characteristics in the valuation of real estate. ...
Verkehrsphasenbasierte Datenanalyse von zeitlich-räumlichen Strukturen der Staufronten
(2022)
To this day, the sudden emergence of the structures of congested traffic poses a great danger to drivers and vehicles: This is especially true when driving into the end of a traffic jam. One way to reduce the danger is the ...
Modellierung der Mechanik und der effektiven Transporteigenschaften von partikulären Kathoden sowie deren Einfluss auf die elektrochemische Performance von Lithium-Ionen-Batterien
(2022)
In the present work, lithium-ion battery cathodes and battery half-cells are numerically investigated. Of main interest is the influence of the calendering of an electrode during its manufacture on the mechanically induced ...
Fast Dense Depth Estimation from UAV-borne Aerial Imagery for the Assistance of Emergency Forces
(2023)
This work addresses the use of commercial off-the-shelf rotor-based unmanned aerial vehicles (UAVs) to facilitate emergency forces in the rapid structural assessment of a disaster site by means of aerial image-based ...
Innovative micro-NMR/MRI functionality utilizing flexible electronics and control systems
(2023)
The advantages offered by the flexible electronics and control systems technologies were utilized for tackling the challenges facing two crucial Magnetic Resonance (MR) applications. The first application is in the field ...
Worte am Werk
(2008)
not yet available
Modellfreies Lernen optimaler zeitdiskreter Regelungsstrategien für Fertigungsprozesse mit endlichem Zeithorizont
(2022)
The quality and performance of components is largely determined by the execution of the manufacturing processes involved. The process result depends -- in addition to the initial state of the component and the process -- ...
Technology and readout for scaling up superconducting nanowire single-photon detectors
(2023)
This work presents three advances to scale SNSPDs from few-pixel devices to large detector arrays: atomic layer deposition for the fabrication of uniform superconducting niobium nitride films of few-nanometer thickness, a ...
Experimental investigation and process simulation of the compression molding process of Sheet Molding Compound (SMC) with local reinforcements
(2022)
In this book, a new three-dimensional approach for the process simulation of SMC is developed. This approach takes into account both, the core layer that is dominated by the extensional viscosity and the thin lubrication ...
OCM 2021 - Optical Characterization of Materials
(2021)
The state of the art in the optical characterization of materials is advancing rapidly. New insights have been gained into the theoretical foundations of this research and exciting developments have been made in practice, ...
Adaptive Umweltmodellierung für kognitive Systeme in offener Welt durch dynamische Konzepte und quantitative Modellbewertung
(2022)
In this work, an approach for adaptive world modeling is proposed. World models for cognitive systems often employ predefined domain models, which may become insufficient when encountering unforeseen entities. The presented ...
Numerical prediction of curing and process-induced distortion of composite structures
(2021)
Fiber-reinforced materials offer a huge potential for lightweight design of load-bearing structures. However, high-volume production of such parts is still a challenge in terms of cost efficiency and competitiveness. ...
Verbesserungen beim Laserschneiden mit Methoden des maschinellen Lernens
(2022)
Although laser cutting of metals is a well-established process, there is considerable potential for improvement with regard to various requirements for the manufacturing industry. First, this potential is identified and ...
Entwicklung von Modellen zur speichergestützten Versorgung mit regenerativen Energien in Inselnetzen
(2022)
The proposed method for the configuration of renewably powered energy supply systems as isolated grids backed by energy storage technology and based on statistical models shows the economic viability of such a system. The ...
Distributed Planning for Self-Organizing Production Systems
(2024)
In dieser Arbeit wird ein Ansatz entwickelt, um eine automatische Anpassung des Verhaltens von Produktionsanlagen an wechselnde Aufträge und Rahmenbedingungen zu erreichen. Dabei kommt das Prinzip der Selbstorganisation ...
In Situ Characterization and Modelling of Drying Dynamics for Scalable Printing of Hybrid Perovskite Photovoltaics
(2023)
Hybrid perovskite photovoltaics could play a vital role in future’s renewable energy production. However, there are still severe challenges when scaling the technology. In this work, perovskite solution films drying in ...
Gutes Klima für die Zukunft. Dekarbonisierung als wichtiger Schlüssel zum nachhaltigen Bauen mit Beton
(2022)
How can we manage the growing demand for housing and the increasing desire for sustainability and climate protection at the same time? And how can the various stakeholders in the concrete construction industry contribute? ...
Nutzung der keramischen Glühkerze als Sensorelement
(2024)
This work presents methods for using the ceramic glow plug as a sensor element. This means that the ceramic glow plug will not only perform its conventional task as a heating element but will also provide information, such ...
Konvolutionäre neuronale Netze in der industriellen Bildverarbeitung und Robotik
(2022)
In the first part of this dissertation, a framework for the design of a CNN for FPGAs is presented, consisting of a preprocessing algorithm, an augmentation technique, a custom quantization scheme and a pruning step of the ...
Überwachte Methoden für die spektrale Entmischung mit künstlichen neuronalen Netzen
(2023)
In this work, artificial neural networks trained in a supervised manner for spectral unmixing are investigated. For this purpose, a suitable network architecture is determined first. After that, the focus lies on the ...
Application of Data Mining and Machine Learning Methods to Industrial Heat Treatment Processes for Hardness Prediction
(2024)
This work presents a data mining framework applied to industrial heattreatment (bainitization and case hardening) aiming to optimize processes and reduce costs. The framework analyses factors such as material, production ...
Objective identification and climatology of mesoscale high-wind features within extratropical cyclones
(2024)
Strong winds accompanying extratropical cyclones are commonly associated with various mesoscale features. This work introduces RAMEFI (RAndom-forest-based Mesoscale wind Feature Identification), an objective and flexible ...
Automated Model Generation and Observer Design for Interconnected Systems
(2022)
This work addresses the automated generation of physical-based models and model-based observers. We develop port-Hamiltonian methods, which for the first time allow a complete and consistent automation of these two processes ...
Modellbasierte Entscheidungsunterstützung für Vertraulichkeit und Datenschutz in Geschäftsprozessen
(2023)
Information Confidentiality and Data Protection Networks (ICPN) support process modelers and process managers in not only taking a purely technical view of data protection and confidentiality, but also in taking it into ...
Breitbandige Frequenzweichen für die Parallelisierung von Millimeterwellen-Messtechnik
(2021)
This work describes the novel use of broadband continuous diplexers that could be integrated into on-wafer probes to parallize millimeter wave on-wafer measurement equipment. A model-based method for the efficient design ...
EAS Elements for Solid Mechanics
(2023)
Proposed in the early 1990s, the enhanced assumed strain (EAS) method is one of the probably most successful mixed finite element methods for solid mechanics. This cumulative dissertation gives a comprehensive overview of ...
Entwicklung und Charakterisierung von Siliziumnitrid-/Siliziumkarbidkompositen für den Einsatz in tribologisch hochbeanspruchten Gleitsystemen
(2023)
In this work, silicon nitride/silicon carbide composites are manufactured and characterized for tribologically highly stressed applications. The characterization of the composite materials shows the influence of the silicon ...
Umweltverträglichkeit und Menschenzuträglichkeit
(2009)
not yet available
Stochastic Range Estimation Algorithms for Electric Vehicles using Data-Driven Learning Models
(2022)
This work aims at improving the energy consumption forecast of electric vehicles by enhancing the prediction with a notion of uncertainty. The algorithm itself learns from driver and traffic data in a training set to ...
Verbinder aus Kunstharzpressholz mit erhöhter Reibung in der Scherfuge
(2023)
For the first time new connectors were realized using densified veneer wood (DVW). Initially, the DVW surface was modified to increase the friction between the connector and the timber part in the shear plane and thus ...
Alexander Camaro (1901-1992) - Leben und Werk
(2021)
In four detailed and richly illustrated chapters, art historian Anna Krüger examines the life and work of painter Alexander Camaro (1901-1992). The study and the catalog raisonné of the paintings are based on a review of ...
Development of NbN based Kinetic Inductance Detectors on sapphire and diamond substrates for fusion plasma polarimetric diagnostics
(2022)
This work aimed at designing, studying and producing the first prototypes of KIDs tailored for fusion plasma polarimetric diagnostics. Diamond was considered for the first time as substrate material for low-temperature ...
Computational, Label, and Data Efficiency in Deep Learning for Sparse 3D Data
(2024)
Deep learning is widely applied to sparse 3D data to perform challenging tasks, e.g., 3D object detection and semantic segmentation. However, the high performance of deep learning comes with high costs, including computational ...
Modellbasierte prädiktive Längsdynamikregelung für künftige Fahrerassistenz- und Automatisierungssysteme
(2024)
A fundamental requirement for future automated vehicles is that curbs and other bumps in the road can be driven over safely, reliably and accurately. This work presents a concept for a model-based, predictive longitudinal ...
Entwicklung keramischer Vergussmassen mit Alkoxysilanen zur Steigerung der Haftfestigkeit
(2023)
The adhesion of encapsulation materials is an dendrimental factor for the robustness and functionality of a power electronic device. In this work the adhesion of ceramic potting materials was developed. A new primer was ...
Herstellung und Charakterisierung von Nb- und Ta-Al₂O₃-Verbundwerkstoffen für Hochtemperaturanwendungen
(2024)
Newly designed coarse-grained Nb-/Ta-Al₂O₃ refractory composite materials with multi-scale structure are potential candidates for high-temperature applications. As a basis, this work deals with the synthesis of composites ...
Entwicklung eines Messsystems zur modalbasierten Schädigungsanalyse von Brückenüberbauten
(2022)
Bridges are key components of infrastructure networks, which are the basic prerequisite for a prospering economy. Regarding maintenance scheduling, profound knowledge of the current bridge condition is of high interest. ...
Entwicklung von Siebdruckpasten zur Herstellung von Glaslotfügungen für die Festoxidbrennstoffzelle
(2021)
Solid oxide fuel cells are used to generate electricity from various fuel gases. The sealants between the stack-components should be gas-tight, mechanically stable and insulating. This work shows that glass ceramics can ...
Architectural Alignment of Access Control Requirements Extracted from Business Processes
(2023)
Business processes and information systems evolve constantly and affect each other in non-trivial ways. Aligning security requirements between both is a challenging task. This work presents an automated approach to extract ...
Hybride und energieeffiziente Antriebe für mobile Arbeitsmaschinen
(2023)
This book contains the conference proceedings to the lectures of the 9th symposium on 28th February 2023 in Karlsruhe. The state of research and new developments in the field of drive technology for mobile machines are ...
Intelligent Reflecting Surfaces in Wireless Communication Systems
(2024)
Accompanied with the development of the wireless communication technologies, the high data traffic is more necessary for civil and industrial applications than ever The concept of an intelligent reflective surface (IRS) ...
A Multiscale In Silico Study to Characterize the Atrial Electrical Activity of Patients With Atrial Fibrillation
(2022)
The atrial substrate undergoes electrical and structural remodeling during atrial fibrillation. Detailed multiscale models were used to study the effect of structural remodeling induced at the cellular and tissue levels. ...
Belief State Planning for Autonomous Driving
(2021)
This work presents a behavior planning algorithm for automated driving in urban environments with an uncertain and dynamic nature. The algorithm allows to consider the prediction uncertainty (e.g. different intentions), ...